WDK-ERA-STROBE Business Doorbell in Use

Entrance Alerts and Driveway Alarm Receiver Sounds

Entrance Alerts, Exit Alarms, and Driveway Alert Receiver Sounds

On this page, you will find a collection of sounds and/or melodies played by the different driveway alarms, entry alerts, and exit devices we carry on 1800doorbell.com.  We are continuing to build this list so if you want to hear a particular sound and it isn’t here, please check back as we are adding more sounds all the time.

If you have visited a similar page on our website, Door Chime Receiver Sounds, you might have noticed that many of the sounds found on that page are also on this page.  That’s because the same receiver (where the sound comes out) might be the same receiver in a door chime kit and an entrance alert kit.  For example, the LRA-D1000 is a wireless door chime kit, while the LRA-C1000 is an entrance alert kit.  Both kits feature the same receiver, the LRA-DCRX.

What are Driveway Alarms, Entrance Alerts, and Exit Alarms anyway?

Before we get into the different sounds the receivers play, it’s important to understand what an entrance alert, driveway alarm, and exit alarm are.  Let me start by saying that in most cases the same product or kit may be used as an entry alert or exit alarm, it just depends on how you want to use them.
Entrance (entry) Alert (Alarm):  These types of devices alert you when someone enters or passes through a monitor zone.  For example, you have a showroom and want to receive an instant alert when someone enters the showroom.  You might be busy in the office, but as soon as the door opens, an alert is triggered, alerting you that someone has opened the front door.

Another example may be the sensor on the front door of your gas station/convenience store.  You could be stocking the cooler and need to know when a new customer enters the store.  There are a variety of different sensors to choose from and the decision comes down to what the entrance is like that you would like to monitor.

Driveway Alarms: The idea is similar to that of an entrance alert, but in this case, you want to be alerted when a car enters your driveway or passes through a monitored zone.  For driveway alarms, the sensor/transmitter needs to be outdoor rated and is typically mounted at or near the driveway or other outdoor entrances.  When a car passes through a monitored zone, the sensor triggers and transmits a wireless signal to the receiver, thus alerting you that an automobile has entered your driveway.

Exit Alarms: The opposite of entrance alerts, whereas you want an alert when someone exits an area.  A good example of this might be an emergency exit lock on a door.  If that door is opened, you want to know because it was either a) an unauthorized exit, or b) an emergency.  It is easy to imagine how the same products can serve dual roles.  The same entrance alert may tell you when someone enters your store, but also alert you when someone leaves.

LRA Series of Long Range Entrance Alerts and Driveway Alarm

There are currently two different receiver features in the LRA series of products.  The LRA-DCRX is a battery-operated (plugin is available) desktop or wall-hanging receiver.  The LRA-VPRX is a portable receiver.  Each of these receivers has four different zones, allowing you to pair a transmitter (push button, motion sensor, etc.) to each zone and each zone will have a unique sound associated with that zone.
Below are three kits in the LRA series of products, along with the receivers that play these sounds.  The fact that all the products in the LRA series are compatible with one another means you can have multiple receivers, as well as multiple transmitters/sensors.

Similar Posts

  • Wired Doorbell Mounting Guide

    The significance of details in home improvement and design cannot be overstated. Even small things like the type of doorbell button you select can significantly impact your home’s overall look. There are three primary styles of wired doorbell buttons: flush, recessed, and surface mount. What are Wired Doorbell Buttons? The wired doorbell push button is…

  • Reviews & Advice on Choosing the Best Wireless Doorbell

    We know it might feel a little overwhelming when you’re trying to select a doorbell for your home or office. Wireless doorbells have come a long way over the years.
    Most “residential” grade wireless product top out with a range at the 150 ft., with some models hitting 300 ft. While this is fine for most homes, offices and commercial applications have too many environmental factors that will degrade a wireless signal. For that, you need something with more “punch,” with ranges of 500ft or more.
    This article explains many of our residential and commercial wireless door chime products in a review format to give you information on how to choose a wireless door chime and reviews of some of the wireless door chimes we recommend.

  • Doorbells for Hearing Impaired & Elderly – Never Miss a Visitor

    As we age, one of the first things “to go” is our hearing. Things we took for granted in our younger years like hearing the phone ring, the television, or the front doorbell buzz are all things we miss dearly in our older years.
    It’s not just a convenience factor, there are safety reason we need to have products we can hear or see. Fire alarms, visitors at the door, or emergency phone calls are just a few examples. We carry over 100 products at 1800doorbell.com designed with the hard of hearing in mind. From simple door chimes with a bright flashing strobe light, to alarm clocks that vibrate your pillow, they are all designed for ease of use and effectiveness. This article outlines a few basic points when choosing the right doorbell for the hard of hearing.

  • How to Program a LRA Push Button (Transmitter) to a Receiver

    The short article below instructs how to program an LRA push button to a receiver. In this case, the receiver is the LRA-DCRX battery-operated receiver. Although these instructions are for programming a push button, the process is similar. For a different transmitter (sensor), trigger the sensor in “Step 4” below rather than pushing the center…