Finally, a Long Range Warehouse Chime with Loud Sound Designed for Large Warehouses & Business Spaces
Before the WDK-ERA-KIT, when you wanted a Long-Range Warehouse Chime with Loud Sound,
Warehouse Doorbell Kit with Loud Sound If you would rather have a kit with a visual notification, please see our Warehouse Doorbell Kit with a Strobe Light . This is a Long Range Warehouse Doorbell with a Loud Sound
The WDK-ERA-KIT series features the ERA-UTDCR and an additional bell (multiple choices available) to increase the sound output to 90-115 decibels. To hear each add-on sound, please scroll down the page.
Like other products in the ERA series of products, you can add more push buttons, door window contacts, or plug-in chime receivers to augment your system. Each ERA-DCRX receiver has four zones, each with a live 12VDC output. Zone 1, in this video, is paired with a long-range wireless magnetic door contact that is triggered when the door is opened.
ERA-DCRX Features & Controls Overview
ERA-DCRX Business Doorbell Chime Receiver
Professional 4-zone desktop receiver with 4,000 ft. range and advanced integration capabilities
4 Zones: Each capable of pairing with 4 transmittersExtended Range: Up to 4,000 ft. from transmittersIntegration Ready: C-relay and 12V DC outputs
Zone & Alert Features
Multi-Zone Support: 4 zones with 3 sensors per zoneCustom Melodies: 12 melodies assignable per zoneVolume Control: 4 levels plus mute and on/offUnlimited Receivers: No limit on receivers per transmitter
Integration & Output
12V DC Outputs: 4 live outputs for external devicesC-Form Relay: For N/O or N/C device integrationTimer Options: 5 sec, 10 sec, 1 min, or 2 min activationExternal Devices: Connect strobes, sirens, horns, speakers
Why Choose ERA-DCRX?
The receiver is the backbone of the ERA system. Its advanced relay system allows integration with virtually any normally open or normally closed device, making it ideal for complex business applications. Need louder alerts? Connect external speakers. Need visual indicators? Add strobe lights. The possibilities are extensive with the four 12V DC outputs and programmable relay timers.
Listen to ERA Receiver Sounds
ERA-UTX Features & Controls Overview
ERA-UTX Warehouse Push Button / Magnetic Door Contact
Dual-function wireless transmitter with 4,000 ft. range for push button or door/window contact applications
Extended Range: Transmits signals up to 4,000 ft.Dual Function: Push button or door/window contactWeather Resistant: Outdoor rated with rubber gasket
Operation & Features
LED Indicator: Lights for 2 seconds when triggered (can be deactivated)Advanced Integration: Contains N/O and N/C contactsPower Source: 3V Lithium battery (CR-2)Installation: Mounting hardware included
Technical Specifications
Frequency: 433 MHzTemperature Range: -30°F to 120°FPush Button Dimensions: 3.38″ × 1.94″ × 0.81″Magnetic Contact Dimensions: 2.0″ × 0.56″ × 0.38″Environment: Outdoor rated with moisture protectionWarranty: 1-year manufacturer’s warrantyManufacturer: Safeguard Supply
Types of Accessories (Fire Alarm Bells, Strobe, Sirens) you can wire to this kit:
The image below shows how the strobe/siren (unit on the left) is wired to the ERA-DCRX receiver. After installation, the cover should be snapped back onto the base unit. In this example, the strobe is wired to the 12V DC output for zone one. When this zone is triggered (by ERA-UTX, ERA-DSTX, or ERA-PIR), the chime will sound, and the connect strobe/siren will trigger.
Each kit comes with a bundle of 15 feet, 2-lead 18AWG wire used to connect the bell or accessory below to the live 12v output on the receiver. Learn more about each of the bell accessories by clicking the link to the product. Scroll down the page to see how to wire the unit.
Please note. These are the sounds the actual receiver plays. They can be turned down, muted, or played with the add-on accessory chosen in the kit.
See and Hear the WDK-ERA-STROBESIREN Premium Long Range Warehouse Doorbell with Loud Sound The short video below shows how the 12V accessory is wired to the ERA-DCRX receiver. This accessory has been discontinued but is replaced with the Safeguard Supply, StrobeSiren , available in Red or Blue.
What makes this Premium Long Range Warehouse Doorbell with Loud Sound ? The short video below exemplifies an accessory hooked up to the receiver. Below the video are the other accessories you can connect with an example of the sound each accessory makes.
Available Accessories
These accessories hook up to the live 12V DC outputs on the back of the ERA-DCRX desktop receiver. For instructions on how to wire the 12V DC devices below to the ERA-DCRX 12V DC outputs, please see the instructions here.
Listen to 12V Accessories Sounds:
12V Fire Alarm Bell. The sound is approximately 90 dBA. Click below to hear the sound:
💡 Note : polarity needs to be observed when connecting the Fire Alarm Bell. The RED wire from the bell connects to the positive (+) terminal screw, and the BLACK wire connects to the negative (-) terminal screw.
SS-SIRENSTROBE: Strobe/Siren Combo. Bright, flashing strobe with a very loud siren at 115 dBA. Available in blue or red.
How do these accessories connect to the receiver?
On the back of the receiver are 4 x 12V DC outputs. You connect the supplied wire from the accessory to the back of the receiver using the supplied wire. When the sensor transmits a signal, the receiver will play the associated chime sound and send a 12V DC to the connected device. For example, if you have the 12V DC Chrome Buzzer connected to the receiver, when someone at the front door pushes the button, the receiver plays a chime sound, and the chrome bell will go off for the set duration (5 seconds up to 2 minutes).
Wiring the 12V Output (one per zone)
The receiver also features a 1 x C-FORM relay. The time setting for the relay will be the same as specified for the 12V DC outputs. The C-Form relay may be set to any combination of zones. You can set the relay when zone one triggers or any other combination of zones. It is important to note that the C-FORM relay DOES NOT supply power. Below is an example wiring scenario using the C-FORM relay.
