LRA-D1000S Loud Doorbell Plugin Kit with Visual Strobe Alerts
$49.95
Super Bright plug-in doorbell with flashing strobe light is Loud perfect for hearing impaired or noisy environments. Easy to use kit includes a push button and a chime with a bright flashing strobe. The chime plugs into any available outlet where the chime/strobe needs to be located. Add more chimes around the home or push buttons for a back or side door. Compatible with all products in the LRA series of products. A quick and easy setup and a 90-decibel chime make this product a must-have. Select “Chime Only”, “Strobe Only”, or “Chime & Strobe”.
Need a stronger distance than 1000 feet? We encourage you to visit the comparable ERA-DCKIT product packed with additional features. The main difference being that the ERA system has a 4000 foot range and the LRA system a 1000 foot range. The ERA also has volume control, where the LRA does not.
Low Flat Rate Domestic Shipping!
- Expedited & International Shipping
- Safe & Secure Checkout
- 30-Day Satisfaction Guarantee
- Real Customer Support
A Door Chime for the Hard of Hearing with a Bright Strobe Light and Plug-in Receiver
Are you looking for a Loud Doorbell Plugin Kit with Bright Strobe Light? The LRA-D1000S is a wireless door kit featuring a plug-in receiver with one push-button & one plugin receiver. The plug-in receiver is small and compact but has a large, loudspeaker that outputs sound from 80-90 dBA (depending on the melody selected), and a bright strobe light (that you can turn on or off). Like all products in the LRA series, this receiver is compatible with all LRA products allowing you to add more receivers, transmitters, etc. to your system to meet your needs.
Simply plug the receiver into a standard wall outlet, follow the programming instructions, and your system will be up and running in a matter of minutes. When this kit is purchased, the push button and receiver provided in the kit are programmed at the factory to the “ding-dong” sound. This receiver may be programmed to two different transmitters, with each transmitter playing a distinct melody on the receiver. Additional receivers enable you to spread them throughout your home or office.
- When purchased as a kit, the push button comes programmed to the receiver. Follow the included instructions to program an additional push button or another transmitter to the receiver.
- Pair/program up to two (2) transmitters to a receiver. Like the LRA-DCRX and LRA-VPRX, other receivers work with up to four (4) transmitters per receiver.
- Three modes of operation; sound only, strobe only, strobe and sound.
- Eighteen (18) melodies to choose from. Decibel ratings of 85 dba-95 dba depending on the melody chosen.
- A low battery indicator indicates when the battery in the paired push button (or another transmitter) is weak and needs to be replaced.
- Plug-in unit up to 1,000 ft. from transmitters. Environmental factors and building materials will reduce the maximum operating wireless range.
- 1-year manufacturer’s warranty.
- Manufactured by Safeguard Supply.
Have problems Hearing the WIRED DOORBELL already installed in Your Home?
Do you have an existing wired doorbell system in your home, but have trouble hearing it? Think of pairing up the LRA-DCRXS Plug-in strobe receiver with a wireless door chime extender featured in our Flashing Doorbell Extender Product by Safeguard Supply.
Add Wireless Receivers Throughout Your Home
Want to hear this doorbell in your bedroom, kitchen, or even your garage? Simply purchase additional LRA-DCRXS plugin receivers or the LRA-DCRX battery-operated receiver to add more sound throughout your home. Each of these receivers may be programmed to the LRA-PBTX wireless push button so that you can easily hear visitors, no matter where you are in your home.
How to LRA-PBTX Push Button Mounts
The LRA-PBTX push button has two pieces. The first image below is the back mounting plate that attaches to the exterior wall. The second image shows this mounting plate and the back of the LRA-PBTX electronics.
Once the mounting plate is attached to the wall using the supplied mounting screws and double-sided tape, the LRA-PBTX button attaches to the mounting plate. (click the arrows to rotate through the images to get a basic idea). The user manual provides full mounting instructions.
Video Examples of the LRA-D1000S and Programming
Watch the following videos for an example of the bright flashing strobe on the LRA-DCRXS. As noted above, you can turn this flashing on or off. The second video demonstrates basic programming.
Want to Hear the Sounds Played by the LRA-DCRXS?
Click the buttons below.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Condition | |
|---|---|
| Wireless Range | |
| Wireless Features | |
| Warranty | |
| Brand | |
| Compatibility | |
| Battery Or Plug In | |
| Kit Or Accessory |
