Can I keep separate transformers for each unit with a two-family button?
Yes. Each button on a Lee two-family or three-family station is an independent switch with its own two terminals, and nothing on the plate connects one button to another. One.
Updated: October 23, 2026Original publish date: October 23, 2026
Can I keep separate transformers for each unit with a two-family button?
Yes. Each button on a Lee two-family or three-family station is an independent switch with its own two terminals, and nothing on the plate connects one button to another. One unit's two wires go to one button, the other unit's wires go to the other, and each stays on its own transformer and chime exactly as before. This is the simplest way to fit a station into an older building where each apartment already has its own doorbell circuit.
Related
More in Installation & Setup FAQ
Browse the full FAQ category or continue with related answers from the same FAQ category.
Related FAQ categories
Can one transformer run two doorbell chimes in a two-family house?Yes, if the transformer has enough capacity. Two mechanical chimes on a 16V 10VA transformer is marginal; a 15VA unit such as the T1615 handles two, and a 30VA unit or the DH910.How do I label the name plates on a multi-family doorbell button?The stations do not come with printed names. On the BC203 and BC208 the name plate is an open metal pocket under each button; slide in a strip of card stock or a printed label,.Can I Add Buttons, Door Contacts or Receivers to the WC180-SS?Yes. The WC180-SS receiver pairs with up to 58 SS Series transmitters, and you can add as many receivers as you need.Can I Add Buttons, Door Contacts or Receivers to an SS System?Yes. Each SS Series receiver pairs with up to 58 transmitters, and there is no limit on the number of receivers.How Do I Install a Doorbell Extender Transmitter?Connect the extender's three wires to the Front, Back and Trans screws inside your wired chime, mount the transmitter, then pair it.