Skip to main content
800-366-7235
Since 1998
1800Doorbell logo
Login

When I Try to Enter Programming on the LRA-DCRXS Plugin Receiver, the red LED Does Not Flash

When I try to enter programming mode on the receiver, the red LED is not flashing, it is a solid red LED that does not flash: This signifies that the two zones of the receiver are programmed/occupied by transmitters. To program transmitters, you must delete the memory of the receiver. Click here for more information…

Updated: October 15, 2026Original publish date: November 19, 2021
Part of Installation & Setup FAQBrowse this FAQ

When I try to enter programming mode on the receiver, the red LED is not flashing, it is a solid red LED that does not flash:

This signifies that the two zones of the receiver are programmed/occupied by transmitters.

To program transmitters, you must delete the memory of the receiver. Click here for more information on deleting the receiver memory.

More in Installation & Setup FAQ

Browse the full FAQ category or continue with related answers from the same FAQ category.

View category

Related FAQ categories

LRA Product FAQWireless Doorbell FAQTroubleshooting FAQ
Can I Add Buttons, Door Contacts or Receivers to the WC180-SS?Yes. The WC180-SS receiver pairs with up to 58 SS Series transmitters, and you can add as many receivers as you need.Can I Add Buttons, Door Contacts or Receivers to an SS System?Yes. Each SS Series receiver pairs with up to 58 transmitters, and there is no limit on the number of receivers.How Do I Install a Doorbell Extender Transmitter?Connect the extender's three wires to the Front, Back and Trans screws inside your wired chime, mount the transmitter, then pair it.Wired doorbell chime replacement optionsExplore your options for replacing a wired doorbell chime, including common issues and installation tips.What does a doorbell transformer look like?Discover what a doorbell transformer looks like and how to identify it in your home.