How do I label the name plates on a multi-family doorbell button?
The stations do not come with printed names. On the BC203 and BC208 the name plate is an open metal pocket under each button; slide in a strip of card stock or a printed label,.
Updated: October 23, 2026Original publish date: October 23, 2026
How do I label the name plates on a multi-family doorbell button?
The stations do not come with printed names. On the BC203 and BC208 the name plate is an open metal pocket under each button; slide in a strip of card stock or a printed label, and it also covers the mounting screw head. On the BC268 each window is a clear lens with a white card behind it, held by a snap-in carrier on the back; pop the carrier off to change the card. A label maker or a laser-printed strip gives the cleanest result.
Related
More in Wired Doorbell FAQ
Browse the full FAQ category or continue with related answers from the same FAQ category.
Related FAQ categories
Which doorbell button do I need for a duplex?A duplex with one shared front door needs one button per unit on a single plate, so each visitor can ring the right household. Pick the Lee BC203 if the chimes are electronic or.Is there a doorbell button for three apartments?Yes. The Lee BC208 three-family station puts three unlighted buttons and three name plate pockets on one plate about 7 inches tall, in polished brass or polished chrome. Each.Can one transformer run two doorbell chimes in a two-family house?Yes, if the transformer has enough capacity. Two mechanical chimes on a 16V 10VA transformer is marginal; a 15VA unit such as the T1615 handles two, and a 30VA unit or the DH910.Can I keep separate transformers for each unit with a two-family button?Yes. Each button on a Lee two-family or three-family station is an independent switch with its own two terminals, and nothing on the plate connects one button to another. One.Why does my lighted doorbell button hum or not ring with an electronic chime?A lighted button passes a small current through its lamp and the chime all the time, which is what keeps the button glowing. Mechanical chimes with tone bars ignore that trickle..