ERA-DCKIT Door Bell for Hearing Impaired
The ERA-DCKIT offers a bright flashing strobe light and loud volume to create a door bell for the deaf and a door bell for the hard of hearing. When a visitor pushes the outdoor push button, the plugin receiver will flash a bright strobe light. This deaf doorbell kit is expandable by adding additional receivers and sensor throughout your home.
If you are hard of hearing and need a reliable doorbell you can count on, choose the ERA-DCKIT. We guarantee it to work in your home.
Low Flat Rate Domestic Shipping!
- Expedited & International Shipping
- Safe & Secure Checkout
- Satisfaction Guarantee
- Contact Us
A Reliable Door Bell for Hearing Impaired People, the ERA-DCKIT
If you’re hard of hearing or deaf, then you know the frustration of something that’s often taken for granted, and that is hearing a door bell chime when a visitor arrives. Finding a hearing impaired doorbell isn’t as simple as it seems, as door bells for the deaf aren’t typically sold at your closest box store retailer.
We want to introduce you to the ERA-DCKIT by Safeguard Supply. This wireless hearing-impaired doorbell is designed for the elderly, hard of hearing, and deaf people. This wireless kit ships with a plugin receiver and a wireless push button. The kit is easy to set up & install and is virtually maintenance-free.
You may have had a bad experience with wireless door chime products, but this wireless doorbell kit is guaranteed to work, or you get your money back. We can guarantee this because of the quality of the product, its features, & the fact it boasts a wireless range of up to 4,000 feet from the outdoor wireless button to the plugin receiver.
In addition to the features of this kit, know you can add additional plugin receivers throughout your home to expand the notification range and add our portable vibrating doorbell for the deaf. For more information on this, click this link for the vibrating doorbell.
The kit ships with 1 x ERA-PBTX, outdoor-rated wireless push button. This wireless button is powered by a powerful lithium battery that will last 1-2 years before needing to be replaced. A unique feature of this wireless pushbutton is the low glowing ring around the center button for easy visibility at night. Mounting is easy using the included double-sided tape and screws. When a visitor pushes the button, it sends a wireless signal up to 4,000 ft. away to the plugin receiver.
The receiver in this kit is the feature-rich ERA-RXPG plugin receiver. The receiver features four (4) mute volume settings and a flashing strobe light setting. When triggered, the chime will play a loud sound and/or (depending on the settings) emit a bright flashing strobe. This bright strobe light is a great way to turn what might look like an ordinary doorbell into a hearing-impaired doorbell.
You can easily add as many receivers to your home as you want and compatible ERA receivers such as the ERA-DSCRX desktop receiver & the ERA-VPRX portable chime receiver with vibration.
The receiver works with up to twelve (12) ERA-compatible transmitters/sensors and has twelve chime melodies to choose from. This allows you to determine which sensor generated the alert quickly.
Hear the ERA-DCKIT-2 Door Bell for the Hearing Impaired Receiver Sounds
|Dimensions||3 × 5 × 5.75 in|
Home Use, Long Distance – Thick Walls, Small Business
|Battery Or Plug In||
Safeguard Supply – ERA Series
|Kit Or Accessory||
Expandable, Flashing Strobe, Multi-Zone, Visual Indicator, Volume Control
We have this about 1/4 mile from home and it works good. My only frustration is that there's no volume **** on the receiver. It has four volume choices and we have it on the lowest, but it's still plenty loud. I had to placed the receiver in a location where it's not so disturbing, as sometimes we have a lot of turkeys and deer that cross its detection.
I am sorry the lowest volume setting is still too loud. At the lowest volume setting, the ERA-DCRX produces sound at about 45-55 dBA (depending on the melody selected and at 5 ft. from the receiver). If the volume level at the lowest setting were much lower, I'm afraid many people would not be able to hear it all. For example, the noise in our warehouse is approximately 40 dBA. A 5-15 dBA sound above the baseline would be hard to hear for most people.
If you push the volume a fifth time, it will mute the receiver, but without a strobe or something like that hooked to it, you would not receive notifications.
Thank you for your review! We're glad you enjoy the ERA-DSDCR-STROBE Wireless Driveway Monitor Kit with Bright Strobe.
We use it as a motion sensor in our showroom. Sometimes in the summer we keep our door open so a door alarm wouldn't work. This unit is a little over kill for inside, but we got it so we could also get a remote beeper, allowing us to go into the adjoining building and be able to hear if motion was detected. Easy to install, plenty loud, works great.
Thank you for your feedback! We're glad to know that the ERA-DSDCR 4,000 ft. Range Best Performing Driveway Alarm is a good motion sensor and that it works great. Thanks again for your feedback!
Happy with my purchase of ERA-DCKIT wireless door chime .It fits my needs perfectly without the hassle of hiring an electrician.The strobe light feature is awesome.
Thank you for your review! We're glad to hear that you're happy with your purchase of the ERA-DCKIT wireless door chime kit. The strobe light feature is cool, thanks for choosing ERA-DCKIT!
I can now hear the doorbell wherever I am in the house. Very easy to install and program. And great customer service.
Thank you for your review! We're glad to hear that our product met your expectations and that it was easy to install and program. We're happy to have been able to help you out.
My doorbell kit was delivered quickly and completely. The instructions were accurate and easy to follow, and installation and programming of 2 zones with 2 external buzzers and 3 transmitters was a snap. I would recommend this system to anyone. Thanks.
We used the fire alarm bell in our warehouse which has loud saws and this has been a great and simple solution.
I work in a 1930 theater built with concrete and rebar. This doorbell unit is part of a wireless system that I hoped would ring from our front entrance up to our office on the 2nd floor. It works perfectly - except someone removed the doorbell from the entrance doors. So I'm hoping that person now has all the doorbells s/he needs. Great product - fast shipping. Thanks.
Thanks for the review! We're glad to hear that the unit works well - through concrete and rebar - and that it arrived quickly.
The Alarm system is working much better than I expected since I have a large metal sided building that is in direct line of sight for one of the transmitters. It is detecting entries in to the driveway every time though. I have submitted a question though asking about a portable alarm receiver for this unit but I am concerned if I am wanting it for in the metal sided building it will likely not work dependably. Thanks for your product it is performing better than advertised or expected in my situation.
Thanks for the great review! We're glad to hear that the alarm system is working well for you and that it's detecting entries into the driveway every time. We do have a portable alarm receiver that may work for you if you're looking for a way to monitor the alarm system from outside the metal-sided building. Click this link to visit the ERA-VPRX: https://www.1800doorbell.com/era-vprx-portable-business-doorbell-receiver.htm.