Skip to main content
800-366-7235
Since 1998

How to Know When the Battery in a ERA Transmitter/Sensor is Low

This applies to the following ERA transmitters (ERA-DSTX, ERA-UTX, ERA-PIR) -The ERA-DCRX (receiver) has four-zone indicator lights that blink when triggered. -When the battery is low in a transmitter paired to a corresponding zone, the zone indicator LED for that light will blink for 10 minutes when that zone is triggered. -When the battery is…

Updated: October 15, 2026Original publish date: November 19, 2021

FAQ and compatibility answers

Use this answer together with the linked product categories below. Most FAQ topics here end in a specific part — a transformer, a chime, a push button, or a receiver — and each category page compares the options we stock.

This applies to the following ERA transmitters (ERA-DSTX, ERA-UTX, ERA-PIR)

-The ERA-DCRX (receiver) has four-zone indicator lights that blink when triggered.

-When the battery is low in a transmitter paired to a corresponding zone, the zone indicator LED for that light will blink for 10 minutes when that zone is triggered.

-When the battery is low in a transmitter paired to a corresponding zone, the melody for that zone will play twice (normally, the melody will play only once).

For the ERA-PIR-SPK: when the battery is low, the melody will play twice, instead of once.

More in ERA Product FAQ

Browse the full FAQ category or continue with related answers from the same FAQ category.

View category

Related FAQ categories

ERA-DSDCR: Can Two Kits Alert Both Receivers?Two ERA kits can share sensors and receivers: up to 12 sensors, unlimited chime receivers, and a separate chime sound for each sensor.How Far Can You Wire Strobes to an ERA-DCRX Receiver?Quick answer: One 12 V strobe drawing 50 mA can be wired about 350 feet one way from an ERA-DCRX receiver using 20 AWG copper wire, based on a 3% voltage-drop target. Wire multiple strobes in parallel. When they share a cable, use their combined current to estimate the wiring distance. Only one zone activates at a time. Each active 12 V DC zone output can supply up to 900 mA.Can I Use My Doorbell Power Adapter in Europe or Other Countries?Yes—if your receiver’s power adapter is labeled 100–240V AC, 50/60Hz, it accepts standard household electricity in the USA, Canada, Europe, the United Kingdom, Australia and many other destinations. You may need a travel plug adapter to fit the local wall socket.My ERA-DSTX Detection Range Dropped From 25 Feet to 15Nine times out of ten nothing has failed. A PIR sensor’s usable range is a moving number set by battery voltage, thermal contrast against the background, and the angle at which the target crosses the beam pattern — none of which show up on a thermometer or a tape measure. Work the checks below in order. Most cases resolve at step 1 or step 3.How Far Will My ERA-DSTX Driveway Sensor Really Reach?A PIR sensor doesn’t measure distance — it measures contrast. It sees a target only when that target is meaningfully warmer or cooler than whatever sits directly behind it, and only when the target moves across the lens’s detection pattern rather than straight at it. Change the background temperature, the approach angle, the battery voltage, or the amount of film on the lens, and the same sensor in the same spot will “lose” ten feet of range with nothing visibly different.