BALERT-WS Wireless Add-On Speaker for BALERT-W Kit Entry Alert
Low Flat Rate Domestic Shipping!
- Expedited & International Shipping (for most products)
- Safe & Secure Checkout
- 30-Day Satisfaction Guaranteed
- Call or Email for Support
This is the add-on WIRELESS speaker compatible with the BALERT-W, wireless break beam entry alert kit by Seco-Larm. This speaker allows you to expand your current system by adding a speaker to other areas so you can hear the chime or alarm sound when the system is triggered.
This is a wireless speaker with an open-air range from your sensor to the speaker of up to 328ft. (100m). Simply follow the instruction for your BALERT kit to pair the speaker to your existing system. You can add an unlimited number of speakers to your kit.
|Dimensions||3.25 × 3 × 2 in|
Sound at Entry
|Kit Or Accessory||
We have a little cat shelter in a busy shopping mall. Now, when working in the back area, we can hear when our customers come in. Couldn’t be happier!
This wireless reflector works well, and is nice that it will only notify you once when people are standing in the way instead of continuing to go off. Only think it seems maybe a bit sensitive to reflective light, so we might get a "cover" to try to shield it and see if that works.
We had a 20+ years door buzzer & it finally quite working.
This new product is 1/10 the size & with a remote speaker we mounted in the rear room. GREAT PRODUCT...
This was purchased for the front door of our 1500’ sqft shop that is usually open. Works great The speaker was placed in the back work area. Chime is loud and clear to alert when someone walks in. Perfect for our needs!
Thanks for the door chime so far it’s been very effective , Eazy smooth installation,
Great deal for the price .
I installed this system last week. Easy to install, works perfectly
Product arrived quickly and was a fairly easy installation. Works great so far.
One thing I'd like to add is to have the ability to cant the reflector to allow for a diagonal beam.
Otherwise I would recommend this product and order it again.
Every thing was a great experience..thank you
Our store (in a shopping mall) had a little battery powered motion sensor that would be set off by people walking up the steps 20 feet away. It was a constant annoyance that would as often as not go off when nobody was there, but be silent when people walked in.
The BALERT Photo Beam Reflector Kit was easy to install - I skipped the mounting plates (tile walls) and used velcro adhesive strips, set it up in under 5 minutes, and it works perfectly!
My only regret - not getting the add-on speaker to run a line to the back room. But we're adding that ASAP!
It was exactly what we were looking for! Easy to install and works great!