Skip to main content
800-366-7235
Since 1998
1800Doorbell
Login

How to Program the ERA-PIR Transmitter to the ERA-DCRX Receiver

Watch the video below to program the ERA-PIR transmitter to the ERA-DCRX receiver.If you are trying to find information on pairing the ERA-UTX transmitter to the receiver, click here. Or, you can watch this video and rather than triggering the passive infrared motion sensor (ERA-PIR), simply trigger the ERA-UTX by pressing the push button on…

Updated: July 27, 2026Original publish date: November 19, 2021
Part of ERA Product FAQBrowse this FAQ

Watch the video below to program the ERA-PIR transmitter to the ERA-DCRX receiver.
If you are trying to find information on pairing the ERA-UTX transmitter to the receiver, click here. Or, you can watch this video and rather than triggering the passive infrared motion sensor (ERA-PIR), simply trigger the ERA-UTX by pressing the push button on the unit.

More in ERA Product FAQ

Browse the full FAQ category or continue with related answers from the same FAQ category.

View category

Related FAQ categories

Installation & Setup FAQ
Understanding the 12V DC Outputs on Your ERA-DCRX Receiver: A Guide to Zones, Strobes, and BellsIntroduction to the ERA-DCRX Receiver The ERA-DCRX receiver is the heart of your long-range wireless doorbell system, designed for business and warehouse environments. It features four independent zones, each capable of supporting up to three sensors or transmitters (for a total of up to 12 per receiver). When a zone is triggered, the receiver plays…Extending ERA Product Range: Connecting ERA-UTX to ERA-DCRX C-FORM RelayThis guide explains how to connect the ERA-UTX to the C-FORM relay on the ERA-DCRX, effectively creating a relay or extender to increase the operating range of ERA products by an additional 4,000 ft. Detailed Use Case Example Consider a scenario where a customer has purchased an ERA-DCKIT, which includes: Initial setup: Solution: Introduce an…ERA-RXPG Plugin Receiver User ManualIntroduction The ERA-RXPG is a long-range, wireless door chime receiver that plugs into a standard 120V outlet. It is compatible with all ERA transmitters. Helpful Notes Volume Control: The volume button is located on the side of the unit (see Figure 1). Pushing it will scroll through four (4) levels of volume control. Pushing it…ERA-PBTX Push Button User ManualIntroduction to the ERA-PBTX by Safeguard Supply The ERA-DCKIT is a long-range, wireless door chime kit. It includes the ERA-PBTX (push button/transmitter) and the ERA-RXPG plugin. This product manual outlines programming the ERA-PBTX to the ERA-RXPG. Helpful Notes about the ERA-PBTX Push Button ERA-PBTX Push Button Battery Installation: This product contains a coin battery that…How to Program the ERA-PIR Transmitter to the ERA-DCRX ReceiverWatch the video below to program the ERA-PIR transmitter to the ERA-DCRX receiver.If you want information on pairing the ERA-UTX transmitter to the receiver, click here. Alternatively, you can watch this video and activate the ERA-UTX by pressing the push button on the unit rather than triggering the passive infrared motion sensor (ERA-PIR). Video Transcript:…