Replace the Light or Center Push in Your Wired Doorbell Push Button
If the center push button is burned out or broken in your outdoor wired doorbell, buying an entire doorbell may not be necessary; you may only need a wired doorbell button light replacement center push button part .
The products listed here are the actual center part of a wired doorbell push button that a visitor presses with their finger to trigger a doorbell button. These products replace a non-lighted center button with a lighted one or a burned-out one with a new one.
Use a Doorbell Button Light Replacement for an Existing Wired Doorbell Pushbutton
For an existing wired doorbell button, remove the center (circular-shaped center push only) and insert the replacement part. These buttons are available in three different finishes and feature a bulb that illuminates the outer rim of the center push, producing a “halo effect” and allowing nighttime visitors to easily see and locate your wired doorbell button.
In most cases, you can pop out the broken circular center push on your website and replace it with one featured on this website, as long as the measurements are the same. The replacement bulbs here feature small flanges you can bend outward after installing the button to ensure it fits snugly inside the wired doorbell push button
Light Button Replacement Part Features:
Dimensions: diameter is 3/4” and depth is 7/8”
Recessed mounted to wired push button plate. The electronics of this center push will protrude behind the push button plate.Lighted by an LED bulb. Please do not use battery-operated wired door chimes with lighted bulbs as they drain the battery. Use a wired doorbell transformer only.
Manufactured by Carlon, a Thomas and Betts Company
One-year manufacturer’s warranty
