Warehouse Motion Entry Alert kit w/ Strobe Light Long Range
The WDK-PIR-STROBE is wireless, motion (PIR) based entry alert kit that is high-powered, long range, and features a bright strobe light perfect for loud environments or noisy areas.
Accessories & Addons:
- Additional information
The WDK-PIR-STROBE is a wireless entrance kit designed to send wireless signals over long distances through tough barriers normally experienced at shops, warehouses, stores, and other locations. The sensor uses passive-infrared to detect heat and motion. When detected, it will transmit a wireless signal up to 2,500 to the included receiver. On the receiver you can turn the sound up or down using the volume control to hear a sound, or connect the included bright strobe light for a visual indicator.
*Please note, this kit may also be purchased with a long range portable receiver in lieu of, or in addition to the desktop receiver.
If you need to monitor an entrance where the door typically stays closed until a customer or visitor enters, we recommend the LH-2500 or WDK-2500-STROBE. These products use a long range wireless door/window contact to signal when the door is opened.
What’s included in this kit:
- 1 x PIR sensor/motion detector (IR-2500)
- 1 x plugin receiver (DCR-2500)
- 1 x bellwire (DH965)
- 1 x amber colored strobe light
- Dimensions of IR-2500 Motion Sensor is 3.75” x 2.75” x 2.5”
- Sensor is rated for light outdoor use. It is recommended to mount it under an eave for outdoor use.
Simply mount the motion sensor above the door, hallway, or other area you want to monitor. Next, plugin the receiver to a standard wall outlet. Pair the sensor to the receiver (don’t worry, it’s easy!). Next, connect the included strobe light to the back of the receiver using the included bell wire.
The PIR sensor included with this kit is packed with features and customization options not normally seen with standard PIR sensors. The sensor is capable of monitoring an area up to 100 degrees wide, and by using the included filter masks, you can cut the monitored zone down to 20 degrees. In addition to this, because the sensor is mounted on a swivel bracket you can rotate it left-to-right up to 80 degrees and up-and-down up to 50 degrees.
The motion sensor also features three different sensitivity settings that will adjust the detection; 12 ft., 25 ft., or 40 ft. You might have an area where you need to throw the monitored zone out a large area or you might want to limit it to a smaller area.
|Dimensions||8 x 8 x 4 in|
|kit or accessory||
Flashing Strobe, Volume Control, Expandable, Multi-Zone, Live 12V DC Output, Visual Indicator, C-Form Relays
Dakota Alerts 2500 Series
|battery or plug-in||
Battery Operated Receiver