Sale!

Skylink WA-434RTL Water Alert Kit Alarm System

$18.98

This is a long-range water alert kit by Skylink.  The included sensor transmits a wireless signal up to 800 feet to the included plug-in receiver.  You can use this product to alert you when the water heater breaks, or your washing machine leaks, thus minimizing any collateral damage.

Out of stock

SKU: WA-434RTL Category:

More Info...

User Manual

Low Flat Rate Domestic Shipping!

  • Check Mark Expedited & International Shipping
  • Check Mark Safe & Secure Checkout
  • Check Mark 30- Day Satisfaction Guarantee
  • Check Mark Real Customer Support
GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
  • Apple Pay

A busted water heater can end up costing you a significant amount of money.  Not just the expense of replacing the water heater, but the clean-up and replacement caused by the water damage.  The problem is, it’s really hard to know if and when something like this is going to happen—that is unless you have something like the WA-434RTL Long Range Household Alert kit by Skylink.

This water alert kit alarms you the instant the sensor detects water.   Once water is detected, the sensor will transmit a wireless signal up to 800 feet away to the plug-in receiver and cause the respective zone on the receiver to flash and beep for 15 seconds when in alert mode.

Setup is easy.   The first step is to pair the sensor with the receiver.  This is a simple process that’s done with some simple pushes of the pairing buttons (see attached manual).

Once you have paired the transmitter with the receiver, test the pairing and the sensor by placing the end of the sensor in water.  Once tested, mount it using the supplied mounting accessories.  Simply mount the transmitter portion at least 6 inches above the end of the sensor.

The sensor included in this kit is powered by a 3V lithium battery.  The receiver plugs into a standard wall outlet.  The sensor/transmitter has a max range (to the receiver) of up to 800 feet.  Walls, construction materials, and other environmental factors will diminish the signal.

The receiver has four zones, and up to four transmitters/sensors may be paired to each zone.  The receiver has three operational settings: alert, alarm, and off.

In Alert Mode – The corresponding zone will flash and also beep several times that correspond to the respective zone in a continuous loop for 15 seconds.

In Alarm Mode – When activated, the corresponding zone will flash and the alarm will sound for its max duration setting of 3 minutes.  Pressing the mute button on the receiver will stop the alarm sound.

  • This is a complete kit that includes one water sensor/transmitter (WA-434TL) and one receiver (HA-434RL)
  • Alerts you when water is detected
  • Multipurpose – great for laundry rooms, sump pump rooms, basements, bathrooms, and more
  • Sensor is powered by included 3V lithium battery.  When the battery level is low, the corresponding zone on the receiver will blink a red LED.
  • HA-434-RL receiver operates with as many as 4 sensors (extra sensors are sold separately)
  • Audio and visual alerts
  • Works in an 800-foot range
  • Easy setup
  • FCC/IC approved
  • 1-year warranty
  • Manufactured by Skylink
Brand

Condition

Warranty

Battery Or Plug In

Kit Or Accessory

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
p
p.
I read the review about the guy not liking this unit.

I read the review about the guy not liking this unit. and I was uneasy about ordering it but installing this unit was as easy as 123.I like the long range of the sender and that it is plugged into the ac.it is a big load off my mind as my water heater is 12 years old so it is only a matter of time B/4 the detector does it's job.

J
J.D.
Not too easy to set up--could be much simpler.

Not too easy to set up--could be much simpler. Would prefer a battery alert, not electric.