LRA Products

Push Button 1 is programmed to Zone 1 on Receivers A, B, C and D (each of the four offices have their own receiver).  When someone presses push button #1,  it will trigger receivers A, B, C, and D to play the "Ding-Dong" sound.  So each office with their own receiver will hear "Ding-Dong" and know it is for the front door.

Push Button 2 is programmed to Zone 2 on Receivers A, B, C and D (each of the four offices have their own receiver).  When someone presses push button #2, it will trigger receivers A, B, C, and D to play the "Westminster" sound.  So each office with their own receiver will hear "Westminster" and know it is for the back door (push button #2).

Push Button 3 is programmed to Zone 3 on Receivers A, B, C and D (each of the four offices have their own receiver).  When someone presses push button #3,  it will trigger receivers A, B, C, and D to play the "Car Horn" sound.  So each office with their own receiver will hear "Car Horn sound" and know it is for side door 1 (push button #3).

Push Button 4 is programmed to Zone 4 on Receivers A, B, C and D (each of the four offices have their own receiver).  When someone presses push button #4,  it will trigger receivers A, B, C, and D to play the "Siren" sound.  So each office with their own receiver will hear "Siren sound" and know it is for side door 2 (push button #4).

Locate the two buttons located on the side of the receiver.  The program button is a solid dot and the melody selector button has a musical note symbol next to it.

Hold down the programming button for approximately 3 seconds until you see a solid red LED inside the strobe light lens.

Let go of the programming button--the red LED should stay on.

Simultaneously, hold down the programming and melody selector buttons together for approximately 5 seconds until you hear a short tone sound.

Let go of the buttons.  You should now see the red LED flashing rapidly.

A flashing red LED denotes programming mode.