FAQs

-When I try to enter programming mode on the receiver, the red LED is not flashing, it is a solid red LED that does not flash:

This signifies that the two zones of the receiver are programmed/occupied by transmitters.

To program transmitters, you must delete the memory of the receiver.

Each of the four (4) zones on the ERA-DCRX receiver has a live 12V DC output.

These outputs enable you to connect an external device to the output to activate when that zone is triggered.

For example, let's say you operated a loud workshop and when loud machinery is turned on, it's hard to hear the receiver.  The live 12V DC outputs provides a couple of options.

One option is using a 12V DC LED Strobe Light and connect it to the output for a zone.  When a visitor arrives and presses the compatible push button, the ERA-UTX, not only does the paired receiver(s) play the chosen chime sound, the bright strobe light will provide a good visual indicator.

Safeguard Supply provides packaged kits that come with a strobe light (4 colors to choose from) along with "bellwire" (a bundle of 18AWG wire), as well as the push button and receiver in the WDK-ERA-STROBE.

Another option would be to connect a loud 105 dB rated siren to the 12V DC output.  When a visitor arrives, the chime plays, and the siren plays a very loud sound to alert you that a visitor has arrived.

Like the WDK-ERA-KIT, Safeguard Supply also has the WDK-ERA-KIT with options like a FIREBELL, SIREN, and Chrome Enclosed Buzzer to choose from.

Each zone has its own 12 V DC output.  That means you can mix and match 12V accessories, like a different strobe color for each zone, to help you better determine which push button or magnetic entrance alert was triggered.

The WC180 has over 16K different transmission (privacy) codes.  When you pair the transmitter with the receiver, the unit will randomly select one of 16,0000 codes to pair.

How to Change the Melody

The LRA-D1000S kit with th e LRA-PBTX and the LRA-DCRXS are will need to be programmed.

Once you've programmed a transmitter 

 The change this melody, please follow the video instructions below.

Craft Chime Information and Trouble Shooting Guide

Chimes consist of a pushbutton, a chime (sound device) and a transformer (changes the voltage from 120 volts to 16 volts).
  • There needs to be at least 18 gauge wiring in the existing home for the new chime to work. (The smaller the number gauge of wire, the bigger the wire.)
  • Next, the customer must consider the length from the doorbell to the actual chime unit and the transformer.
Transformer Information - Use 18 gauge wires on all Chime Installations
  • T1610
    • One 2-note Chime with all wires less than 50’
  • T1615
    • One 2-note Chime with any wire longer than 50’
    • Two 2-note Chimes with all wires less than 50’
  • T1630
    • One 2-note Chime with all wires longer than 50’
    • Two 2-note chimes with any wire longer than 50’
    • Three 2-note chimes
    • One 8-note chime with any wire longer than 50’

Troubleshooting Guide for Craftmade Wired Door Chimes & Doorbell Buttons

Problem: Chime will not work Potential Remedies
  • Check to make sure that the circuit is complete to the chime and that there is power from the breaker.
  • Make sure the light on the button or buttons is/are lit.
  • Make sure there is at least 18 gauge wire being used everywhere (from the buttons to the chime and from the transformer to the chime. The wiring can be larger than 18 gauge, but not smaller.
  • Make sure that the transformer is 16volt. All Craftmade chimes must be 16 volts.
  • Make sure that the correct wattage is used for the particular chime that is used.
  • Craftmade transformers come in 3 different wattages. (see above) You can always use the larger wattage transformers as it will not hurt anything. Never use less wattage. The larger the wattage is better if you’re not sure.

Using the Relay on the LRA-DCRX to Connect External Device

LRA-DCRX relay settings and location on back top right of LRA-DCRX product. The LRA-DCRX receiver features a relay that may be used to integrate and activate an external device.  For example, a strobe light, 12V DC output, or other devices may be configured to trigger when the relay on the receiver activates. Tips & Notes:
  • The unit WILL NOT supply power to the external device.  The external device must have a separate power supply.
  • The relay ONLY works with Zone 4 on the receiver.  For the relay to work, there must be a transmitter paired with Zone 4.LRA-DCRX Relay Diagram.  Use a small screwdriver to put wires for external device into NO or NC slots.
  • The relay DOES NOT provide power.
  • The relay may be set to normally open or normally closed.
  • Ensure the relay is set to the "on" position.
  • Set the duration of output to 2 seconds or 5 seconds.
In this example we will wire a 12V DC siren to sound when the push button paired to Zone 4 is triggered. LRA-DCRX Relay Wiring to External Device.  Use the jumpers to set to specific zone and to tigger for allocated time.  Drawing shows jumper settings. What you will need:
  • A LRA trasmitter (push button, door contact, etc.) paired to zone 4 of the LRA-DCRX receiver.
  • 12V DC siren
  • Extra wire (as needed)
  • External power device used to power the 12V DC siren.  In this example we are using a 16.5 VAC /40VA Class II plugin transformer.  Please make sure the power supply you use will supply the necessary power to the external device.
  1.  Ensure the power supply is unplugged.
  2. Wire one wire of the siren into one of the "normally open" connectors on back of the receiver (see image below).
  3. Wire the other wire of the siren to the plug-in transformer (see image below).
  4. Take a wire and connect one end into the other slot of the "normally open" relay.
  5. Take the other end of that same wire and connect it to the transformer (see image below).
  6. Plug in the transformer.  Ensure the receiver is powered on--test.

To change a programmed melody on the LRA-DCRXS (plugin strobe receiver) you must erase the memory and reprogram.  During programming, you can select the melody you want for each transmitter.

Please note, the melody associated with a zone on the LRA-DCRX may be changed without deleting the memory.

Manufacturer's Contact Information

Below you will find a list of manufacturers who has products on 1800doorbell.com. If you need technical assistance or have an inquiry regarding your warranty, please call the product manufacturer for assistance.

By clicking the name of the manufacturer you can find the products we sell by that manufacturer. Under the company name, we have also listed a link to their website contact us page and/or the company phone number when available.If you have purchased from our Amazon store and would like to return the product, please use the Amazon Orders portal for your account to facilitate the return. We would happy to assist you if you are not getting any satisfaction by contacting the product manufacturer, but we do recommend you start by calling them about any technical support or warranty related issue. If you have purchased the product directly from us within the past 30-days and want to return the product, please contact us at 1800doorbell.com. Thomas & Betts: Carlon, Dimango, and Lamson & Sessions Products Rodan Electronics
  • Phone: 800-366-71010
Craftmade Dakota Alerts Milton Products Alarm Lock Systems Bellman & Symfon Clarity Hearing Alert Products Comfort Audio Products Cross Point Industries Heath-Zenith Chimes and Lighting Honeywell Doorbells & Chimes Optex Safeguard Supply

-When I try to enter programming mode on the receiver, the red LED is not flashing, it is a solid red LED that does not flash:

This signifies that the two zones of the receiver are programmed/occupied by transmitters.

To program transmitters, you must delete the memory of the receiver.

LRA Series Compatibility Notice

The LRA series of products were upgraded in 2021.  In order to accept the necessary software changes, the control board needed to be changed as well.  

Although we do our best ensure upgraded versions of the products are compatible with older versions, sometimes it is unavoidable.  This is the case with the newest upgrade to the LRA series of products.

This is only relevant if you are purchasing a new LRA products as a replacement or add-on to a system you purchased from 1800doorbell.com PRIOR to 3/01/2021.  First time purchases on or before 3/010/2021 should no be affected.

Purchasing An Add-On or Replacement Product for Your Existing LRA Series.

If you already have LRA products purchased prior to 3/01/2021, we need to check compatibility to ensure we ship you a compatible product. On the back of your existing products, locate the white tag.  Notice the "Model No."  See the images below as and example.

Add Your Heading Text Here

MA 600 RATING LABEL MA L600 RATING LABEL
  • If the model number DOES NOT end in "-L" (similar to the first image on the left) then please contact us by email or phone to ensure we ship you the compatible product.
  • If the model number on back of your product DOES end in "-L"(Similar to the image on the right) then proceed with your order without contacting us.