Voice Alert System-6 is a new annunciator system featuring wireless PIR sensors transmitters and a remote receiver/speaker base unit. Users record their own alert messages and are then notified with their own voice message when activity in a monitored is detected.
Key applications include:
Wireless Driveway Alarm
Residential and Small Business Security
Child Monitoring and Pool Safety
Home Automation
System-6 allows a maximum of six user recorded messages. Each message is specific to one zone. For instance, zone one could be for a driveway alarm, car coming up the driveway. while zone two could be for a sensor monitoring the back yard - "Alert! Child by the pool!. Perhaps a third sensor guards a side entrance against intruders.
However, when this PIR detects movement, the base unit plays .Intruder on patio. while also triggers a floodlight using one of four .C. relays included on the base unit. System- 6 can monitor all three zones simultaneously and still have three additional zones available when needed.
Users can alter their messages and place the wireless sensors wherever they wish. Voice Alert System-6 sets up in minutes and can be completely customized to fit their individual needs. The wireless PIRs feature: all weather protection, adjustable mounting and sensitivity, and can send a signal 300 feet through walls and up to 1000 feet in open space.
New Voice Alert System with Wireless Rubber Hose Sensor.
Download the original bell sound for your Voice Alert
Transmits a signal up to 1,000 feet when someone runs over the hose. The sensor is a NiCad Battery and uses a solar panel to recharge the battery. The system comes with 20 feet of hose, hose anchor, NiCad battery and receiver. The Hose Must Be Placed on Asphalt or Concrete Driveways ONLY, can not be used on gravel driveways!
Voice Alert System-6 is ideal for
residential and small business notification, security, and property protection.
Voice Alert System-6 combines wireless and digital voice technology to create the most flexible and cost-effective annunciation system available today. System-6 monitors up to six zones using wireless PIR Sensor Transmitters and a remote Receiver/Speaker Base Unit. When a zone is breached, a signal is sent up to 1000 feet (300' through walls) to the remote Base Unit. Upon signal reception, the Base Unit plays a user (voice-recorded) message identifying that specific zone.
Voice Alert System-6 is an excellent plug and play solution for hard-towire areas. It also features multiple "C" relays enabling it to trigger additional devices or to integrate into a larger security or home automation system.
Common applications include: Wireless Driveway Alarm, Perimeter Security, Customer and Visitor Notification, Customer Greeting, Child Safety, Pool Security, Delivery and Supply Room Monitoring, and Annunciation of activity at CCTV Camera.
Features:
Monitors up to 6-Zones
Adjustable Beam and Sensitivity
Multiple "C" Relays
All-Weather Construction PIR
Adjustable PIR Mounting
Benefits:
Customized Voice Alerts
Completely Wireless
Plug and Play Installation
False Alarm Deterrent
Voice Warning for Low Battery
Simple to use
New Vibration Sensor/Transmitter Available!
Model TXPCBB-V
The Voice Alert TXPCBB-V Transmitter is a versatile wireless transmitter design with a vibration switch to trigger messages stored in the Voice Alert receiver/speaker. The transmitter has a transmission range of up to 1000 feet line of sight or 300 feet through walls. The transmitter is housed in a waterproof box that is designed for indoor or outdoor use. The box includes (4) mounting tabs that allow the box to be mounted either horizontally or vertically to accommodate a variety of installation options.
The small (4" x 4") transmitter is triggered by a movement or bumping of the box.
Residential Use
The Wireless Voice Alert System-6 offers homeowners security, notification, convenience, and most of all peace of mind. Whether it is used as a simple wireless driveway alarm or as a full wireless security system, Voice Alert System-6 stands out by being easy to use, totally flexible and very cost-effective.
With a range of up to 1000 feet (300' through walls) and the ability to trigger additional devices using "C" relays (lights, alarms, home automation), the Voice Alert System-6 offers installers, homeowners, and automation enthusiasts an ideal solution for hard-to-wire situations.
Pool Safety
Voice Alert System-6 is an excellent choice for pool security and child safety. There is no substitute for direct parent supervision. However, distractions happen and unfortunately that is when most water accidents occur. But with Voice Alert always on watch, you receive advanced warning when crucial seconds that can mean the difference in saving a child's life.
The patented Voice Alert System-6 serves as a strong layer of protection and has the following advantages over other pool safety products:
Alerts parents before a child is in the pool
Sounds in-home alerts where supervision is usually lost
Sets up in minutes and is exceptionally easy to use
Gives parents additional seconds that can mean everything
Lets users record their own alert messages
Expands as needed for other household dangers
Commercial Use: Voice Alert System-6 can support commercial users by monitoring their storeroom inventory, announcing customers, or even promoting products on sale. Since System-6 features user-recorded alerts, the variety of applications depends primarily on the type of commercial operation.
Is the Sensor/Transmitter waterproof? The Sensor/Transmitters can be used indoors and outside. They are designed to withstand weather including rain and snow but are not designed to be submerged in water. When installed outside the Sensor/Transmitters do best when in a covered area and not in direct sunlight.
How does the Sensor/Transmitter work? The Sensor/Transmitter is a passive infrared receiver (PIR). It detects movement by the change it causes in background temperature and then transmits a radio signal to the Receiver/Speaker that movement has been detected.
How far will the Sensor/Transmitter send a signal to the Receiver/Speaker? The Sensor/Transmitters will transmit a signal in an open area up to 1000 feet to the Receiver/Speaker. Through walls the Sensor/Transmitters will transmit a signal to the Receiver/Speaker up to 300 feet.
Will tree branches trigger a false signal? It is possible for branches to cause a false trigger. The best location to install the Sensor/Transmitter in an area where tree branches and bushes will not be blown by a wind in the detection zone of the Sensor/Transmitters.
Will birds or dogs or cats trigger a false signal? The Sensor/Transmitters are designed to ignore small animals under 40 Lbs. To reduce the possibility for a false trigger caused by movement of a small animal it is recommended that the Sensor/Transmitters be mounted at a height of 7 1/2 feet above the ground. The lower the Sensor/Transmitters are mounted the greater the chance of picking up a small animal.
How often will the Sensor/Transmitter send a signal? The Sensor/Transmitter has two modes for sensing movement and sending a signal. The (setup) mode that is set at the factory identifies all movement and transmits each detected movement to the Receiver/Speaker. The battery saver mode has an adjustable timer that will detect movement after the time delay setting and then transmit to the Receiver/Speaker.
Will the system work through walls of my home? The system is designed to function through the interior walls of a home and exterior walls of a home. The Sensor/Transmitters have difficulty transmitting a signal through aluminum siding or metal surfaces and are best located on a window in that situation.
How many Sensor/Transmitters will the system recognize? There is no limit to the number of Sensor/Transmitters that can be installed with a system. There are 6 voice messages that are available for the Sensor/Transmitters to activate.
Can a Sensor/Transmitter be recognized by more than one Receiver/Speaker? The Sensor/Transmitter can be set to activate an unlimited number of Receiver/Speakers.
Will the Sensor/Transmitter recognize a small child? The Sensor/Transmitter is intended to identify children of about 40 Lbs or larger when the Sensor/Transmitter is installed at a height of 7 1/2 feet above the ground. If it is desired to identify smaller children then the Sensor/Transmitter will need to be installed lower to the ground. When animals are present they may create a false trigger.
Will the Sensor/Transmitter work in the dark? Yes, the Sensor/Transmitter will work in the dark or in full light.
How long will the battery last in the Sensor/Transmitter? The battery in the Sensor/Transmitter can last up to 1 year depending on if the Sensor/Transmitter is set to battery saver mode. Temperature can also affect the life of any battery. Operating a battery at cold temperature will reduce its life.
How large of an area do the Sensor/Transmitters monitor? The Sensor/Transmitters are designed to monitor a 40-foot by 40-foot area when they are installed at 7 1/2 feet above the ground and there are no obstructions.
Where can I get additional Sensor/Transmitters? Additional Sensor/Transmitters are available at the store where you bought your Voice Alert VA-6000S system.
We offer a 30-day money back guarantee on all Voice Alert products.
In addition, Cross Point Industries, Inc. warrants to the purchaser that this product shall be free from defects in materials or workmanship for a period of one year from original purchase date. Proof of purchase is required. Please retain your receipt. The warranty registration card should also be filled out completely and immediately returned to Cross Point Industries, Inc.
During the warranty period, if this product is found to be defective under normal use and service, Cross Point Industries, Inc. shall at its option repair or replace it with new or reconditioned product.
This warranty does not cover defects resulting from accidents, abuse, misuse, or unauthorized service. This warranty gives you specific rights, You may have other legal rights which vary from state to state.
To obtain warranty service, return the product with shipping prepaid to Cross Point Industries, Inc. Cross Point Industries, Inc. reserves the right to replace any discontinued product with one of equal value.
FEDERAL COMMUNICATIONS COMMISSION RADIO AND TELEVISION INTERFERENCE STATEMENT FOR A CLASS 'B' DEVICE
User instructions:
If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into a different outlet so that the equipment and receiver are on different branch circuits.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Cross Point Industries could void the user's authority to operate the equipment.
NOTE: This product was FCC certified under test conditions that included the use of shielded I/O cables and connectors between the system components. To be in compliance with FCC regulations, the user must use shielded cables and connectors and install them properly
Voice Alert TM is not intended to be a LIFE SAVING instrument as it may false trigger or miss a trigger. Atmospheric conditions, sun spot activities, local transmitters, or receiver nulls may prevent triggering or cause false triggering. It is the users responsibility to take this into consideration.
The Voice Alert driveway alarm employs military grade PIR and RF technology, is manufactured in a ISO9002 certified plant and inspected to the strict statistical control standards of MIL-STD 105D, 1.5 AQL. Voice Alert meets the demanding requirements of the Department of Homeland Security, INS, all branches of the United States Military, FCC & UL.
The Voice Alert System-6 Wireless driveway alarm sets a new standard in cost-effective, customized security and notification for homes and small businesses. Using the latest technology in wireless PIR and digital voice recording, Voice Alert System-6 offers:
6-Zone Monitoring Capability
Customized Voice-Recordable Alerts
All Weather, Wireless PIR Sensor Transmitter
Multiple Beam Patterns for Optimal Detection
Adjustable Mounting, Beam Sensitivity, and Delay Timer
4 "C" Relays
To install, simply mount the PIR for the driveway alarm where you need zone control, plug in the base unit and then record a voice message to identify each zone. Other features include: On/Off switch, adjustable volume control, missed message indicator, missed message playback, one button message check, and low battery voice notification.
Receiver/Speaker Specifications
Records six separate voice messages (6 seconds each)
Supports an unlimited number of Sensor Transmitters
Speaker volume control
Voice message (user initiated): One button for each zone
Voice message (transmitter initiated): Programmed to desired message (user programmable)
Individual "C" relays enable other devices to be triggered
Missed message indicator: Flashing LED
Missed message playback: Push button
Receiver type: Super Heterodyne
Frequency of receiver: 433.92 MHz
Method of recording: Digital, solid state, user-recordable
FCC Part 15 Approved
Receiver Stability: Crystal
Receiver Sensitivity: 100dBm
Low Battery LED indicates sensor w/low battery
Low Battery voice message identifies specific zone
AC/DC Power Adapter - approximately 7' cord length
Power Requirement: 117V AC - 60Hz
Power Input: 9VDC - 1 AMP
Installation: Wall or tabletop
Receiver/Speaker Dimensions: 8.50" W x 1.75" H x 5.75" D
Wireless PIR Sensor Transmitter General Specifications
Monitored range: 40' x 40' feet
Adjustable (rotating, pivoting) sensor mounting
Indoor/outdoor all-weather construction
Adjustable detection sensitivity
Adjustable delay timer (0-3 minutes)
Battery operated - 9V battery included
Method of intrusion detection: Pyroelectric Infrared Detector (Heat)
Adjustable Beams: Default: Fan Beam approximately 40' x 40' (mounted 7.5') Options: Vertical Beam, Horizontal Beam
Frequency of RF transmitter: 433.92 MHz
Output Power: FCC Part 15 Approved
Transmission distance: up to 1000' in open space (300 feet through walls)
Transmitter modulation: OOK (On Off Keying)
Code programming: User programmable 288 codes
Power management: Battery saver settings
Sensor Transmitter Dimensions: 2.38" W x 5.00" H x 5.00" D
