The SC-1000 Wireless Home Security System is a complete wireless security kit. It contains all the basics you need to cover an average sized home, plus includes some great features you will not find in other wireless home security systems.
There are two fabulous features of this kit that you won't find with competitors. First, is the easy set up and installation. Out-of-the-box, the SC-1000 system is ready to get to work protecting your home and family. The sensors come preset to work with the included control panel, which means you don't have to spend endless hours putting in codes to make sure that each component "talks" to each other.
Second is the “Auto-dialer, or Emergency dialer” (the AD-105 formerly the AD-433S). The auto-dialer allows you to program up to 9 telephone numbers that the system will dial when the control panel activates it. Let's face it, most of us have tried typical system that is monitored by a “central monitoring” station and found it isn't as effective or seamless as you might expect. Typically, when your alarm is triggered, the alarm system seizes the phone line and alerts the central monitoring station. Then, the central station waits before notifying the police in case it is a false alarm. The truth is, by the time the police are notified and arrive at your home (typically a lead time of 10-15 minutes) the criminal is gone. Most criminals know the average time it takes the police to arrive at your home.
With the use of the Skylink auto-dialer, you, (or anyone that you program into the system) will be alerted immediately! In addition, you can by-pass the monthly monitoring fee you would pay to a centralized monitoring service.
As an additional bonus, the system can be set to "bypass mode", which means it will work independently and bypass the control panel. In this mode, if a sensor is triggered, the auto dialer will dial out without generating an auto alarm. PLEASE NOTE: when in bypass only mode, the auto dialer unit DOES NOT work with the same sensor used with the unit in Alarm mode. You will need to purchase two separate sets of sensors if you plan to utilize the bypass mode. This ONLY applies if you use bypass mode.
The control panel is capable of controlling up to 24 sensors, whether door or window sensors, vibration sensors, or any of the other sensors compatible with the Skylink system. When any of the sensors are triggered, a wireless signal is immediately sent to the control panel. The siren sounds and the Auto-dialer (emergency dialer) begins dialing through the preset numbers you have already programmed into the system.
The Emergency or Auto-Dialer is can call up to 9 different phone numbers! Whether it's a pager, cell phone, or a neighbor's number, the auto-dialer will begin dialing numbers until one of the calls is picked up. When the phone is answered, the auto-dialer plays a message you have recorded.
The SC-1000 is a complete wireless security system kit that can be installed in minutes. With the included motion sensor and two door or window sensors, the system covers enough area for a relatively large sized residence. With the purchase of additional sensors and additional accessories the SC-1000 is capable to monitor a business, apartment, or other commercial application.
