Carlon has thought of just about everything with the Door/Window Entrance Alarm. The sensor/transmitter easily attaches with supplied mounting screws or double sided tape to a window or door you would like to monitor. When the door or window opens, the transmitter sends a wireless signal to the plug in receiver/speaker.
The transmitter/sensor may be set in alarm mode or chime mode. Alarm mode plays a loud alarming sound at the receiver while chime mode will play one of 16 chime sounds (changeable by pushing a button on the transmitter).
The receiver has a on/off switch to silence it. This is a great, easy to install, window/door alarm. Once you have mounted the sensor/transmitter, you simply plug in the receiver and the set is operational.
The system is easily expandable with other Carlon/Dimango wireless buttons, sensors, and receivers.
- Alarm or Chime Sounds When Magnetic Contact is Separated on your door/cabinet.
- Receiver plugs into any standard household AC wall outlet not controlled by a switch
- Additional transmitter and magnet sold separately to monitor more than one location
- Convenient On/Off Switch with two second delay, lets you deactivate the alarm when you need access to the protected area.
- Uses one 6-Volt alkaline battery (installed)
- One year warranty
